Installation of a RaceChip Chiptuning Module
Installation of a RaceChip® module is dead easy. No matter which of our three Chiptuning modules you choose. Usually, it only takes you 10 – 15 minutes, without special tool and without any engine vehicle knowledge. You just have to connect the RaceChip® module with the engine and the engine control device via two plugs. Fix it with the cable ties that come with it. Your driving pleasure can start right away!
Installation Manual and Pictures
Along with your RaceChip® Chiptuning module you get the matching installation instructions. Depending on the type of engine, you get one either for Common-Rail, Pump-Nozzle or Turbo Petrol engines. Upon request, we would be pleased to send you additional pictures of your car’s engine compartment. This could make it even easier for you. Please just get in touch with our technical customer service.
Also our RaceChip® Supportcenter provides answers to frequently asked questions in terms of installation.
You find a collection of our installation videos for different kinds of vehicles on our Youtube channel.
Chiptuning Installation in only a few Steps
Before installing the RaceChip® Module
When installing your RaceChip® the residual current must not flow any longer. Therefore, switch off the engine first of all. Open the engine bonnet. Lock your vehicle then. Now, wait for about 5 – 10 minutes. Start installation then:
Installation in 6 Steps
Loosen and remove engine bonnet.
Localize the connection options.
Loosen the original plug.
Check the installation of the cable harness by means of the supplied control plug. (Only RaceChip® Standard)
Connect the RaceChip module to the matching plug of the cable harness.
Fix the cable harness and the RaceChip Chiptuning module to the supplied cable ties in the engine compartment.
Hint: This is an installation instruction in brief. The detailed one comes with the consignment! Detailed video tutorials about the installation are also available in our video data base.